![]() ![]() ![]() Note that the client can be synchronized to the server but the server cannot be synchronized to the client. The server needs to be configured with only an NTP primary clock. In this mode, the IP address of the server needs to be obtained in advance. The unicast client/server mode is used on a higher stratum on a synchronization subnet. ![]() On the NTP synchronization chain, determines the stratum of the clockĭeployment Location and Synchronization Direction The master reference clock source, that is, the number of NTP servers ![]() The NTP distance from a device on the network to Which means the local clock of the NTP server is configured as the Network synchronize their clocks with the clock of the NTP server, Server synchronized with the authoritative clock is set as stratum1,Īnd is used as a master reference clock source. Time of the authoritative clock is synchronized through the broadcast The current authoritativeĬlock is mostly a Radio Clock or the Global Positioning System. The clock of a lower stratum is preferred.Ĭlock is used as a reference time source for a synchronization subnet,Īnd is located at the top of a hierarchical structure on the synchronization Optimal clock source by comparing the clocks determined in the two If both manners are configured, the device selects an Is used as an NTP clock server to provide a reference clock for the
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |